View NE3503M04_226688.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEC's C TO Ku BAND SUPER LOW NOISE AND NE3503M04 HIGH-GAIN AMPLIFIER N-CHANNEL HJ-FET
FEATURES
* SUPER LOW NOISE FIGURE AND HIGH ASSOCIATED GAIN: NF = 0.55 dB TYP., Ga = 11.5 dB TYP. @ VDS = 2 V, ID = 10 mA, f = 12 GHz * FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M04) PACKAGE: * GATE WIDTH: Wg = 160 m M04 PACKAGE
APPLICATIONS
* DBS LNB gain-stage, Mix-stage * Low noise amplifier for microwave communication system
ORDERING INFORMATION
PART NUMBER NE3503M04-A NE3503M04-T2-A QUANTITY 50 pcs (Non reel) 3 kpcs/reel PACKAGE 4-Pin thin-type super minimold (Pb-Free) MARKING V75 SUPPLYING FORM * 8 mm wide embossed taping * Pin 1 (Source), Pin 2 (Drain) face the perforation side of the tape
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: NE3503M04-A
ABSOLUTE MAXIMUM RATINGS (TA = +25C)
PARAMETER Drain to Source Voltage Gate to Source Voltage Drain Current Gate Current Total Power Dissipation Channel Temperature Storage Temperature SYMBOL VDS VGS ID IG Ptot Tch Tstg RATINGS 4.0 -3.0 IDSS 80 125 +125 -65 to +125 UNIT V V mA A mW C C
Caution
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
NE3503M04 RECOMMENDED OPERATING CONDITIONS (TA = +25C)
PARAMETER Drain to Source Voltage Drain Current Input Power SYMBOL VDS ID Pin MIN. - - - TYP. 2 10 - MAX. 3 15 0 UNIT V mA dBm
ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise specified)
PARAMETER Gate to Source Leak Current Saturated Drain Current Gate to Source Cutoff Voltage Transconductance Noise Figure Associated Gain SYMBOL IGSO IDSS VGS (off) gm NF Ga TEST CONDITIONS VGS = -3.0 V VDS = 2 V, VGS = 0 V VDS = 2 V, ID = 100 A VDS = 2 V, ID = 10 mA VDS = 2 V, ID = 10 mA, f = 12 GHz MIN. - 15 -0.2 40 - 10.5 TYP. 0.5 40 -0.7 55 0.55 11.5 MAX. 10 70 -2.0 - 0.75 - UNIT A mA V mS dB dB
NE3503M04 TYPICAL CHARACTERISTICS (TA = +25C, unless otherwise specified)
TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE
250 Total Power Dissipation Ptot (mW) 200 150
125
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE
100 80 60 40 20 VGS = 0 V -0.2 V -0.4 V -0.6 V 1.0 Drain to Source Voltage VDS (V) 2.0
100 50
0
50
100 125 150
200
250
Drain Current ID (mA) Ambient Temperature TA (C)
0
DRAIN CURRENT vs. GATE TO SOURCE VOLTAGE
80 VDS = 2 V Drain Current ID (mA) 60
40
20
0 -2.0
-1.0 Gate to Source Voltage VGS (V)
0
MINIMUM NOISE FIGURE, ASSOCIATED GAIN vs. DRAIN CURRENT
1.6 Minimum Noise Figure NFmin (dB) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 5 10 15 20 25 NFmin Ga 14 Associated Gain Ga (dB) 12 10 8 6 4 2 0 30 Minimum Noise Figure NFmin (dB) f = 12 GHz VDS = 2 V 16 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0
MINIMUM NOISE FIGURE, ASSOCIATED GAIN vs. FREQUENCY
VDS = 2 V ID = 10 mA 25 Associated Gain Ga (dB) 20 15 10 5 0 16 18 20
Ga
NFmin 0 2 4 6 8 10 12 14
Drain Current ID (mA)
Frequency f (GHz)
NE3503M04 PACKAGE DIMENSIONS
FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M04) (UNIT:mm)
2.050.1 0.40+0.1 -0.05 0.30+0.1 -0.05 1.250.1 2 3
(Bottom View)
(1.05) 3 2
0.60
0.65
V75
2.00.1
0.65
1
4
0.65
4
0.30
0.590.05
PIN CONNECTIONS
1. 2. 3. 4. Source Drain Source Gate
0.11+0.1 -0.05
0.30+0.1 -0.05
+0.1 -0.05
1
2.00.1
1.30
1.25
1.30
1.25
NE3503M04 MOUNTING PAD DIMENSIONS
Reference 1
0.8
FLAT-LEAD 4-PIN THIN-TYPE SUPER MINIMOLD (M04) PACKAGE (UNIT:mm)
1
1. 0 9 0.
4 0.74 2
1. 0 0 1.
3
0.3 TH
Reference 2
1.6
2
1.25
0.6
1
0.5
0.6
4
1.3
3
NE3503M04 RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
03/04/2005
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of NE3503M04

	To Download NE3503M04 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .